Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 169)

Screen Examples
161
8. Tap 1H[W! to continue.
Setup Your Staking Options
9. Enter the first station that you want to stake in the
Station field.
10. Enter the desired spacing between the staked
stations in the
Station Interval field.
11. In the Offset field, select L if you wish to stake an
offset on the left side of the curve, or select R if you
wish to stake an offset on the right side and enter
the desired offset here. (If you are not staking an
offset, enter an offset of zero.)
12. Tap the
92IIVHW / *UDGH button if you want to
account for a vertical offset or percent grade for the
staked points and enter the appropriate valued in
the same field. When specifying a vertical offset, you
must also select the
D or U radio button to indicate if
the specified offset is downward or upward from the design point,
respectively.
13. Enter the current rod height in the Height of Rod field and tap
6ROYH!.