Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 106)

User’s Manual
98
Add Templates to the Alignment
1. Tap
5RDGV , (GLW 5RDGV from the Main Menu to open the
Add/Edit Roads screen.
2. Since we are creating a new road, tap
1HZ« to open
the New Road screen.
3. With the
5RDG tab selected, enter a name for the
road in the Road Name field. In this example, we
used Example .
4. Tap the &KRRVH $OLJQPHQW« button and select an
alignment. In this example, we selected the
Roadway alignment created on Page 55. Tap OK to
continue.
5. Tap the 6HW 32%« to open the Road Alignment
Properties screen to define where the road begins in
the job.
6. Enter the following data then tap OK:
North: 5000
East: 5000
Elev: 100
Start Station: 0+00
7. The next step is to add the templates. We will use
the template created earlier to define both sides of
the road. Tap the
7HPSODWHV tab.