Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual User Manual

Page 140

User’s Manual

132

In the

Sequence

field, specify if you want to perform

Direct Only

shots to each known point or

Direct and Reverse

shots.

Tap

6ROYH« after each field is correctly filled in. A

new screen will open where you can shoot a resection
point.

Enter the name of the point that you plan to shoot in
the

Resect Point

field.

If you are shooting more than two resection points,
you have the option of taking

Distance and Angle

measurements with each shot or

Angle Only

measurements by making the appropriate selection
from the

Option

pull-down menu.

Note: The

Angle Only

option allows you to perform all

shots without the use of a prism, but the resulting
occupy point that is computed will not have an elevation
associated with it.

With this screen filled in correctly, aim toward the next resection
point and tap the

7DNH 6KRW« button to shoot the specified

resection point.

10.

Repeat Steps 7 through 10 until every resection
point is shot. After the final shot is completed, the
Save Point screen will open where you can specify a
description for the new point.

11.

Tap OK to return to the Resection screen. You can
tap the

Results

tab to view information about the

stored point or the

Map

tap to see a graphical

representation of the resection.