Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 171)

Screen Examples
163
Scale Adjustment
The Scale routine will adjust the coordinates of selected points by a
specified scale factor relative to a base point. This is useful to repair
data that was collected where an incorrect scale factor was applied.
1. Tap $GMXVW , 6FDOH from the Main Menu.
2. Use the 7DS 3RLQWV« or 7R)URP« button to specify
the points that you want to adjust.
3. Enter the name of the base point in the Base Point
field.
4. Specify the scale factor to apply in the Scale Factor
field.
5. If you also want to adjust the elevations of the
selected points, check the
Include Elevation in
Adjustment checkbox.
6. Tap 6ROYH. The coordinates for the selected points
will be adjusted.
Note: If you choose to also scale elevations, the scale factor will be
applied to the difference in elevation between the base point and each
selected point. For example, if the base point elevation was 100 and
the elevation for a selected point was 150, applying a scale factor of
0.5 would result in an elevation of 125 for the selected point.