Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 177)

Screen Examples
169
Performing a Traverse Adjustment
1. Tap
$GMXVW , 7UDYHUVH $GMXVW from the Main
Menu.
2. Use the
7DS 3RO\OLQHV« or 7R)URP« button to
select the polyline or points that define your
traverse, which should be in the same order that
the traverse points were collected.
3. Select the appropriate checkboxes to define the
type of adjustment(s) to perform and what will be
adjusted.
4. Tap 1H[W ! to continue to the next screen. The
screen that opens will depend on the selections
made from the main screen.
5. If an angle adjustment is being performed, the
screen shown here will open. Enter the closing
angle for the traverse in the form of an angle-right.
6. Tap 1H[W ! to open the next screen of the
adjustment wizard.