Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 13)

Getting Started
5
An installation routine will also run on the Recon. No further action
is required.
Registering
After Survey Pro is installed, the Standard Module must be
registered for Survey Pro to be fully functional. If it is
not registered, Survey Pro will only run in demo mode,
which means all jobs will be limited to no more than 25
points, and if a job is stored on the Data Collector that
exceeds this limit, it cannot be opened.
If you start Survey Pro and the Standard Module has not
yet been registered, the screen shown here will open.
Tap the
5HJLVWHU 0RGXOHV« button to access the Register
Modules screen. To run in demo mode, simply tap 5XQ
,Q 'HPR 0RGH .
To register your Modules, tap the
(QWHU 5HJLVWUDWLRQ &RGH button.
Enter the registration code provided by your TDS dealer
in the
Registration Code field and tap 5HJLVWHU. This will
register all of the modules that you have purchased. If
there are modules that you feel should be registered but
are not, contact TDS tech support.
Add-on modules can also be purchased from your local
TDS dealer to upgrade your TDS Survey Software.
Upgrading involves simply registering the appropriate
module using the same method as described above
If you want to register a particular module, access the
Register screen by tapping
)LOH , 5HJLVWHU 0RGXOHV from
the Main Menu.