Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 26)

User’s Manual
18
Note: If you tap a point from the map view that is located next to
other points, another screen will open that displays all of the points
in the area that was tapped. Tap the desired point from the list to
select it.
Scroll Buttons %XWWRQ
When a button label is preceded with the symbol, it indicates that
the button label can be changed. Each tap of the
symbol will toggle
through the various button label options and the corresponding field
associated with it. For example, in the Backsight Setup screen, the
backsight can be defined by a point or a direction by toggling the
scroll button between
%6 3RLQW and %6 'LUHFWLRQ .
Special Point Symbols
Some field labels are preceded with a special symbol. For example,
the
Occupy Point field in the Backsight Setup screen is displayed as
“
+
Occupy Point ” The plus symbol indicates that the occupy point is
represented as a plus symbol when viewing it in the Map View.
Other symbols are also used to represent other types of points.
Index Cards
Many screens have access to other screens that are still part of the
original screen. The different screens are selected by tapping on
various tabs, which look like the tabs of on index cards. Because of
this, each individual screen is referred to as a card. The tabs can
appear along the top of the screen or the right edge.
The Backsight Setup screen consists of two cards. One is titled Input ,
and the other is titled Map .