Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 172)

User’s Manual
164
Translate Adjustment
The Translate routine will move points horizontally and/or vertically
a specified distance and direction. This routine is often used after a
survey was performed in an assumed coordinate system. If the actual
coordinates for at least one of the points is found later, the Translate
routine can be used to shift all of the affected points to the correct
coordinate system and/or elevation.
1. Tap $GMXVW , 7UDQVODWH from the Main Menu.
2. Use the 7DS 3RLQWV« or 7R)URP« button to select the points that
need to be adjusted.
3. Define the direction and distance for the adjustment using either
of the following two methods:
Translate by Distance and Direction
The Translate by Distance and Direction method simply requires that
you enter the distance and direction to adjust the selected points.
•
Leave the Translate by Coordinates checkbox
unchecked.
•
Toggle the $]LPXWK / %HDULQJ button to the
desired format and enter the direction to adjust
the selected points.
•
Enter the horizontal distance to adjust the
selected points in the
Distance field.
•
Enter the elevation to adjust the selected points
in the
Elevation field.
•
Tap
6ROYH. The selected points will be adjusted
by the direction and distance entered.