Spectra Precision Survey Pro v3.80 Recon iPAQ User Manual - Manual (Page 78)

User’s Manual
70
e. Accept the default coordinates for the first job
point by tapping
)LQLVK . You will return to the
Main Menu.
2. Check the Job Settings.
a. Tap -RE , 6HWWLQJV from the Main Menu to open
the Settings screen.
b. Tap the Instrument tab if it is not already selected
and make sure both the Brand and Model fields
are set to Manual Mode .
c. For this example, tap the Surveying card and un-
check all the checkboxes.
d. Tap OK to save the job settings.
3. Add a backsight point to the job.
a. Select -RE , (GLW 3RLQWV from the Main Menu.