Seed Hawk 30 SERIES: 600C & 800C 2013 - Manual (Page 89)

SEED HAWK® 30 SERIES OPERATOR’S MANUAL 89
4.28.7 FURROW DEPTH AND WIDTH
The knives are designed to place fertilizer 0.75 in (19 mm) below and 1.5 in (38 mm) to the side
of the seed.
TO ADJUST THE DEPTH OF THE FERTILIZER KNIFE IN RELATION TO THE SEED KNIFE:
1. Loosen hardware, #1 FIGURE 4.123.
2. Raise or lower fertilizer knife accordingly.
NOTE: Factory setting for fertilizer knife is “Y”: 20.875 in (530 mm) from the carbide tip
to the corner on the trip plate as shown in FIGURE 4.123.
3. Tighten hardware.
Y
1
FIGURE 4.123