Seed Hawk 30 SERIES: 600C & 800C 2013 - Manual (Page 15)

SEED HAWK® 30 SERIES OPERATOR’S MANUAL 15
2.5 HYDRAULIC SAFETY
 Ensure that all hydraulic system components are kept clean and in proper working
condition.
 Periodically inspect condition of hydraulic hoses, lines and components and remove and
replace any parts showing damage or deterioration.
 Use only replacement parts specified by the manufacturer.
 Make repairs following instructions provided by the manufacturer.
 Wear appropriate personal protective equipment when unsure if residual pressure may
exist in hydraulic components during trouble‐shooting and/or making repairs.
 Use a piece of cardboard or wood to check for hydraulic leaks.
 Ensure all fittings, couplings and other hydraulic connections are intact and properly
tightened before operating implement hydraulic system.
 Ensure that all persons operating, adjusting, maintaining and/or repairing the
implement know procedures and how to seek or summon medical assistance should an
injury occur.
2.6 TRANSPORT SAFETY
 Ensure that drill is attached to tractor properly.
 Ensure drawbar hitch pin retainer is in place and functioning properly.
 Ensure safety tow chain is securely attached to tractor.
 Ensure all lighting and implement marking devices are intact and visible.
 Ensure implement is properly marked according to local road regulations.
 Heed all local road traffic regulations.
 Do not exceed 25 km/h (15 MPH).
 Reduce travel speed on rough roads and surfaces.
 Do not allow riders on the implement at any time.