Seed Hawk 30 SERIES: 600C & 800C 2013 - Manual (Page 102)

SEED HAWK® 30 SERIES OPERATOR’S MANUAL 102
5.8 MAINTENANCE SCHEDULE
Item
Procedure Frequency
Reference Notes check lube clean change hours
    
Steering hitch   12
DAILY
2 fittings: 1‐top, 1‐bottom
Wing castors   100
Main frame wheels   100
100 hr or annually
re‐pack bearings or 2 pumps
grease
Rear axle wheel hubs   100
100 hr or annually
re‐pack bearings or 2 pumps
grease
Wing wheel hubs (if
configured)
  Re‐pack bearings annually
Packer wheel hubs
  100 100 hr or annually
Seed/Fertilizer Knives
related components
 10/100
10 hr or inspect daily, and,
100 hr or before seeding
Wings down
(if configured)
 100
at end of seeding season, or,
when stored for long periods of
time
Brakes  Adjust twice a year
Ball Lock Valves
open
 100
at end of seeding season, or,
when stored for long periods of
time
Dump Line
open ‐ drain in pail
 100
at end of seeding season, or,
when stored for long periods of
time
Hydraulic Cartridges
flow control / relief
 100
at end of seeding season, or,
when stored for long periods of
time
Hydraulic Cylinders
cylinder seals
  A/R 10 / A/R
10 hr or daily ‐ inspect
replace as required (A/R)
Tires
air pressure
 10
10 hr or daily
inflate to proper pressure
Opener Pivot Points  annually re‐torque