Seed Hawk 30 SERIES: 600C & 800C 2013 - Manual (Page 66)

SEED HAWK® 30 SERIES OPERATOR’S MANUAL 66
4.22.3 LOUP CALIBRATION PROCEDURE
1. Select "Meter Calibration" from the Menu Settings.
2. Select the desired meter to calibrate.
3. Set to the desired shaft speed and select "Prime".
4. Meter will turn 2 revolutions to ensure meter roller is full
of product.
FIGURE 4.67
FIGURE 4.68
FIGURE 4.69
FIGURE 4.70