Seed Hawk 30 SERIES: 600C & 800C 2013 - Manual (Page 33)

SEED HAWK® 30 SERIES OPERATOR’S MANUAL 33
4.5 PRE‐OPERATION CHECKLIST
Inspect tires. Check tire inflation pressure and adjust, if necessary.
Inspect wheel hub fasteners. Adjust torque to proper setting, if necessary.
Check depth setting of packer wheel arms. Adjust, if necessary.
Check depth setting of fertilizer knives. Adjust if necessary.
Check tractor hydraulic reservoir level. Add hydraulic fluid if level is low.
Refer to tractor Operator’s Manual.
Inspect all hydraulic lines, hoses, fittings and couplers.
IMPORTANT! Use a clean cloth to wipe any accumulated dirt from the implement and
tractor couplers prior to connecting the hydraulic system.
Inspect seed and dry fertilizer distribution system.
Make sure manual wing locks shown in FIGURE 10 are un‐pinned and the pins are
placed in holder prior to winging down. Only left side shown, will need to do the same
procedure for the right side of the machine.
NOTE: Check wheel hub fasteners periodically to ensure proper tightness, especially
prior to travel on public highways.
FIGURE 4.3