Seed Hawk 30 SERIES: 600C & 800C 2013 User Manual
Page 41
SEED HAWK® 30 SERIES OPERATOR’S MANUAL
41
5. Reinstall the bearing and locking pin and select a suitable gear setting. Close the emptying
hatch. If the latch clamp cannot be closed, open and clean so that the emptying hatch lock can
catch correctly.
6. Push in the shut‐off hatch and fold down the latch clamp.
NOTE: The grooves on the rapeseed rotor have to be guided into the grooves on the seed box.
FIGURE 4.17