Seed Hawk 30 SERIES: 600C & 800C 2013 User Manual
Page 51
SEED HAWK® 30 SERIES OPERATOR’S MANUAL
51
4.17.1 STATUS MENU
This Soft Key Menu displays the current status state of
your system. This menu is beneficial when checking
communications and/or connections. This menu is
“view only”. Using the Selector Knob or the Navigation
Keys allow you to view more information if your system
is equipped with more sensor than can be displayed.
Pressing the “OK” Soft Key, the Enter Key or the Toggle
will allow you to exit the menu. To access from the
Main Menu Run Screen, press any soft key to bring up
the Soft Key Menu, press “Setup”, then “Status”.
4.17.2 CONTRAST MENU
This Soft Key Menu is quick access to view and/or
change your current contrast setting. To edit the
contrast simply use the Selector Knob or any of the
Navigation Keys to increase or decrease the contrast.
Press the Enter Key or the Toggle to accept the change
and exit. To access from the Main Menu Run Screen,
press any soft key to bring up the Soft Key Menu, press
“Setup”, then “Contrast”.
4.17.3 VERSION MENU
This Soft Key Menu displays your current firmware
version as well as the date and times it was released for
production. To access from the Main Menu Run Screen,
press any soft key to bring up the Soft Key Menu, press
“Setup”, then “Version”.
FIGURE 4.30
FIGURE 4.31
FIGURE 4.32