Seed Hawk 30 SERIES: 600C & 800C 2013 - Manual (Page 105)

SEED HAWK® 30 SERIES OPERATOR’S MANUAL 105
5.10 STORAGE OF THE MACHINE
When not in use the machine should be stored indoors. This is particularly important since the
machine contains electronic equipment. The electronic components are of a very high
standard and are normally unaffected by damp, but we recommend nevertheless that the
machine is stored indoors. The LOUP III monitor should be stored at room temperature during
the winter and in between seasons.
Shiny machine parts, such as piston rods and wearing parts, should be coated in grease or oil
for the winter.
Make sure that the drill is thoroughly cleaned. Allow the emptying hatches to remain open to
facilitate ventilation.
Before unfolding the seed drill in freezing temperatures, it must be left to stand for a while in a
heated room so that the seed hoses can regain their suppleness.
FIGURE 5.12