Seed Hawk 30 SERIES: 600C & 800C 2013 - Manual (Page 73)

SEED HAWK® 30 SERIES OPERATOR’S MANUAL 73
4.24.3 ADJUST APPLICATION RATE
The meter rate can be quickly adjusted while seeding by pressing the “circle arrow” key. This
brings up the meter rate setting screen.
Select the meter rate to adjust turning the spinner knob to highlight the meter desired. Meter1
is the default meter. Then press the UP/DOWN keys to increment the application rate. The rate
will immediately adjust for the selected meter. To adjust another meter navigate to it with the
spinner knob and adjust it up or down.
The soft keys will show all active meters. Pressing the soft key for a meter will turn them on
and off individually.
Press the “circle arrow” key again to return to the main run screen.
FIGURE 4.84 FIGURE 4.85