Seed Hawk 30 SERIES: 600C & 800C 2013 - Manual (Page 62)

SEED HAWK® 30 SERIES OPERATOR’S MANUAL 62
4.20 RESTORE SETTINGS TO DEFAULTS
Choosing this item will allow the user to restore the monitor to factory defaults on all global
settings. This is useful when moving the monitor to a new installation or when it is necessary to
“start over”. A dialog box will appear to verify the selection before any setup changes are
made incase this item was chosen in error. Once changed, the original settings cannot be
recovered and must be set individually.
FIGURE 4.60