IAI America RCP2W-RA10C - Manual (Page 57)

51
6. Connecting the Controller
When constructing an application system using the actuators and controllers, inappropriate wiring and
connection of the cables may cause unexpected troubles such as cable break and connection failure. Listed
below are the prohibited things to be done in cable handling and treatment.
Ɣ 'RQRWFXWDQGH[WHQGVKRUWHQRUUHMRLQWKHFDEOHV
Ɣ :KHQFDEOHVFDQQRWEHIL[HGFRQVLGHUWKHZD\WRHDVHWKHORDGWRWKHFDEOHVZLWKVXFKPHWKRGDVE\
using the actuator in the range of the cable bends only with its weight or by using a stand-alone cable
hose to gain a large radius bending.
ƔDo not let the cable flex at a single point.
Steel Strap
(Piano Wire)
Tie them up softly.
ƔDo not let the cable bend, kink or twist.
ƔDo not pull the cable with a strong force.
ƔDo not let the cable receive a turning force at a single point.
ƔDo not pinch, drop a heavy object onto or cut the cable.