IAI America RCP2W-RA10C - Manual (Page 52)

46
5. Installation
(5) Using a flange
[A] Applicable models: RA3C, RA4C, RA6C, RGD4C, RGD6C types
[B] Applicable models: RA10C (optional)
Install a flange on the reference surface
using bolts (this method is not applicable
to guide types).
Next, install the flange to the mounting
frame using bolts (use the mounting
bracket for the double guide type).
[1] Install a flange using the tapped holes
on the reference surface.
Flange
[2] Install the flange to the mounting
frame using bolts (M8).
Applicable models: RA3C, RA4C, RA6C, RA3R, RA4R, RA6R, RGD4C, RGD6C, RA8C, RA8R types