IAI America RCP2W-RA10C - Manual (Page 30)

24
2. Specifications
[With double guides]
Restriction in Stroke and Maximum Speed (unit: mm/s)
Type Motor Type
Lead
(mm)
Stroke (mm)
50 100 150 200 250 300
RCP2-RGD3C 28P
2.5 114<93> - -
5 187 - -
RCP2-RGD4C 42P
2.5 125<114> 118<114> 87
5 250 237 175
10 458 350
RCP2-RGD6C 56P
4 130
8 210
16 450<400>
(Note) Values in brackets < > are the maximum speed when
vertically oriented.
[Splash proof type]
Restriction in Stroke and Maximum Speed (unit: mm/s)
Type Motor Type
Lead
(mm)
Stroke (mm)
50 100 150 200 250 300
RCP2W-RA4C 42P
2.5 125<115> 115 85
5 190 175
10 450<250> 350<250>
RCP2W-RA6C 56P
4 100
8 200
16 320<265>
RCP2W-RA10C 86P
2.5 63
5 125
10 250<167>
(Note) Values in brackets < > are the maximum speed when
vertically oriented.
Caution: Please do not set the speed or acceleration/deceleration settings beyond the rated values.
It may cause an occurrence of vibration, malfunction, or shorten the product life.
When having the actuator run to synchronize with multiple axes, adjust the speed setting
of the axis with the maximum speed and the acceleration/deceleration of the axis with the
minimum acceleration/deceleration.
Setting especially the acceleration/deceleration beyond the rated values may cause a creep
or a slip of the coupling.