PASCO Xplorer-GLX Users’ Guide - Manual (Page 90)

84 D a t a F i l e s S c r e e n
GLX-to-GLX File Transfer
To transfer files directly between two GLXs, connect the larger USB port of one
GLX to the smaller USB port of the other GLX using the included USB host-
connection cable.
The GLX connected by the larger USB port is the host unit, and the one con-
nected by the smaller port is the remote unit. All GLX-to-GLX file-transfer oper-
ations are controlled in the Settings screen of the host unit.
When a remote GLX is connected, two additional folders appear in the Settings
screen of the host GLX, which represent the RAM and Flash folders of the
remote unit. Use these folders like the host RAM and Flash folders to open,
delete, move, and copy files (see pages 80–81). You cannot open a file directly
from the remote GLX; you must first move the file to the host GLX’s RAM or
Flash folder.
The Data Files screen with a remote GLX connected
Host GLX Remote GLX
Use the host-connection cable to connect two GLXs
Remote GLX
Folders