FlexLink XT (макс. 30 кг) Монтаж - Manual (Page 52)

52 5113235
Mounting pallet locating station XTPX P11A
Introduction
Mount the locating station on conveyor XT or XT
Compact. If nothing else is specified the instruction
step is valid for both XT and XT Compact conveyor.
Tools
Instruction
Soft faced hammer
Allen key 6 mm
Adjustable wrench
Box wrench 10 mm
Piece of slide rail 4 pcs
1 Mount the pins to the locating units.
2 Use a soft faced hammer and hit the pin carefully
until it reaches the end position.