FlexLink X85 Монтаж стальной цепи 5056849 - Manual

E Instruction Steel chain 5056849 for X85 471
PO
X45
XS
XL
XLP
X85
X85P
XH
XK
XKP
X180
X300
GR
CS
XT
XC
XF
XD
FST
XLX
X85X
X180X
X300X
GRX
CSX
ELV
CTL
TR
APX
IDX
E Instruction Steel chain 5056849 for X85
Mounting instruction for X85 system, for corresponding information concerning XM system, see instruction
on FlexLink web site, Steel chain XM.
Dimensions
2,5
3,0
42,5
Chain
5056849
Slide rail
XBCR 25 P
Center line
As an alternative, slide rail XBCR 25 PB can be used.
Rebuilding kit for end drive unit, 5058263
Rebuilding kit for end drive
unit
5058263
Item Qty Id no Name Item no
1 2 5057414 Wheel 1153-0
HPI-50 NK/K 5057414
2 1 5111385 Distance piece 5111385
3 1 5111401 Screw 5111401
4 2 5046416 Washer BRB 8,4x16x1,6
5 1 5046629 Nut 5046629
Procedure:
Use existing holes in the drive unit side plates and
mount the material in the rebuilding kit according to the
pictures above. After mounting, adjust position of the
rollers.
3 4 1 2
1
4
5
Rebuilding kit for end drive unit, direct drive, 5058269
Rebuilding kit for end drive
unit, direct drive
5058269
Item Qty Id no Name Item no
1 2 5058267 Slack protection 5058267
2 2 5057414 Wheel 1153-0-
HPI-50 NK/K 5057414
3 1 5054359 Screw M6S M8x100 H 8
4 1 5046629 Nut 5046629
5 2 5046416 Washer BRB 8,4x16x1,6
6 1 5058266 Distance piece 5058266
Procedure:
Existing slack protections (A) have to be removed and
replaced with the new items (B), included in the rebuild-
ing kit. After mounting, adjust position of the rollers (C).
1 3 5
2
6
2
4 5 1
B
C
A
A