FlexLink X85X (85 мм) Монтаж XBCCX - Manual

PRE-REQUISITES
Recommended tools
SAFETY
WARNING
At installation, maintenance
and service, make sure the
motor is shut off. WARNING
The system must not be
operated without safety
equipment properly
mounted.
XBCCX 300A85 XBCCX 300A180 XBCCX 300A300
DOCU MENTA TION
PRODUCTS
DOCU MENTA TION DOCU MENTA TION
XLAHX 4x7
See slide rail
assembly
instruction
5115295
The illustration may not always correspond exactly to ordered component.
The sub-frames must be removed
for feeding the conveyor chain into
the line. 1.
Clamp the chain to the beam profile.
Use the FlexLink chain tool to remove
a steel pin from the chain, so that two
links are separated. 2.
Remove excess links and use the chain
tool to put the chain back together
again. 3.
Sub-frames