Extron Electronics DMS 1600_2000_3200_3600 User Guide - Manual (Page 95)

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • HTML Operation 89
Configuration Tab
System Settings Page
The DMS matrix switcher downloads the System Settings page (see figure 58) when you
click the
Configuration tab. The screen consists of fields in which you can view and edit
IP administration and system settings (see Ethernet Connection on page 108 for basic
information about IP addresses and subnetting.
Figure 58. System Settings Page
On password-protected connections, there are two levels of protection: administrator and
user. Administrators have full access to all switching capabilities and editing functions. Users
can create ties, create and recall presets, set output mutes, and view all settings with the
exception of passwords.
IP Settings fields
The IP Settings fields provide a location for viewing and editing settings unique to the
Ethernet interface. After editing any of the settings on this page, click
Submit at the bottom
of the IP Settings fields section.
Unit Name field
The Unit Name field contains the name used as the “from” information when the switcher
e-mails notification of its failed or repaired status. This name field can be changed to any
valid name, up to 24 alphanumeric characters.
NOTE: The following characters are invalid or not recommend in the matrix name:
+ ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.