Extron Electronics DMS 1600_2000_3200_3600 User Guide - Manual (Page 38)

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Operation 32
Example 7: Recalling a preset
In the following example, a preset is recalled to become the current configuration. The steps
show the front panel indications that result from your action.
1. Clear all selections: Press and release the Esc button. The button flashes once.
2. Select Recall Preset mode: Press and release the Preset button.
PRESET
1 2 3 16
Press the button.
All input buttons with assigned presets light.
Lit
(preset assigned)
Unlit
(no preset assigned)
3. Select the preset: Press and release the input button for the desired preset.
C O N T R O L
PRESET ENTER ESC VIEW
1 2 3 4 5 6 7 8 15 16
INPUTS
The Enter button blinks
to indicate the need to
recall the preset.
Press the button.
The button blinks to indicate that this
preset number is selected but not recalled.
4. Confirm the recall: Press and release the Enter button. The configuration stored in
the selected memory location is now the current configuration and can be viewed in the
View-only mode (see
example 4 on page 26).
C O N T R O L
PRESET ENTER ESC VIEW
The Enter and Preset
buttons return to unlit or
background illumination.
Press the button.
All input buttons and output
buttons return to unlit or
background illumination.