Updating firmware – Extron Electronics DMS 1600_2000_3200_3600 User Guide User Manual
Page 78
DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Matrix Software
72
Updating Firmware
The firmware upgrade utility provides a way to replace the firmware that is coded on the
control board in the switcher without taking the switcher out of service.
Update the switcher firmware as follows:
1.
Visit the Extron website,
www.extron.com
, click
Download
(see figure 41).
3
2
3
1
1
Figure 41.
Location of Firmware Upgrade Files
2.
Click
Firmware
.
3.
Select the appropriate firmware file (such as DMS Series) to download and click
Download
.
4.
Enter the requested personal information and then click
Download
to copy the firmware
to your computer.
5.
Click
Run
twice (see
a
) on the next page). The PC downloads the firmware
update from the Extron website and starts the Extron Installation Program to extract the
firmware file.
6.
Click
Next
(
b
). The program extracts the firmware files and places them in a folder
identified in the InstallShield Wizard window. Note the folder to which the firmware file is
saved.
7.
Click
Finish
to exit the program (
c
).