Extron Electronics DMS 1600_2000_3200_3600 User Guide - Manual (Page 11)

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Introduction 5
Operational flexibility — Operations such as input/output selection and setting of presets
can be performed using a variety of local and remote control mechanisms:
• Front panel controller
• Matrix Switchers Control Program
• Simple Instruction Set (SIS)
• HTML pages
• Remote control panels and keypads (see the list on page 3 )
The serial ports allow remote control via a PC or a control system. The Ethernet link
allows multiple remote links with two levels of password protection.
Upgradeable firmware — The firmware that controls all switcher operation can be
upgraded in the field via RS-232/RS-422 or Ethernet, without taking the switcher
out of service. Firmware upgrades are available for download on the Extron website,
www.extron.com , and can be installed using the Matrix Switchers Control Program or the
built-in HTML pages.
Labeling — The included Button Label Generator software lets you create labels to place in
the front panel I/O buttons, with names, alphanumeric characters, or color bitmaps for easy
and intuitive input and output selection. Alternatively, labels can be made with any Brother
®
P-Touch
®
or comparable labeler.
Global memory presets — 32 global memory presets are available as a time-saving
feature that lets you set up and store input/output configurations in advance. You can then
recall those configurations, when needed, with a few simple steps. The presets are available
via front panel operation or serial port or Ethernet control.
Rack mountability — The DMS matrix switchers are housed in rack-mountable metal
enclosures with mounting flanges for standard 19-inch racks.
Front panel security lockout modes (Executive mode) — If a matrix switcher is
installed in an open area, where operation by unauthorized personnel may be a problem, a
security lockout mode can be implemented. When the front panel is locked, a special button
combination or SIS command is required to unlock the front panel controller and make the
front panel fully operational.
I/O grouping — Allows the matrix switcher to be virtually divided into smaller subswitchers,
making installation and control easier. I/O grouping limits the selection of inputs and outputs
to members of the same group. I/O grouping allows specific outputs, such as those
designated for a specific purpose, to be grouped together.