Extron Electronics DMS 1600_2000_3200_3600 User Guide User Manual
Page 63
Command and Response Table for SIS Commands (continued)
DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Programming Guide
57
Command
ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Information requests (continued)
Request system status
S
DMS 1600 response
X1*
•
X1*
•
X1*
•
X1*
•
X1*
•
X1*
•
X1*
•
X1(
•
X2)
•
X2)
•
X2!
•
X2!]
DMS 2000 response
X1*
•
X1*
•
X1*
•
X1*
•
X1*
•00
.
00•00
.
00•
X1(
•
X2)
•00000•
X2!
•0
]
DMS 3200 response
X1*
•
X1*
•
X1*
•
X1*
•
X1*
•00
.
00•00
.
00•
X1(
•
X2)
•
X2)
•
X2!
•0
]
DMS 3600 response
X1*
•
X1*
•
X1*
•
X1*
•
X1*
•
X1*
•
X1*
•
X1(
•
X2)
•
X2)
•
X2)
•
X2)
•
X2!
•
X2!]
Response description (DMS 1600):
+3.3V•+5V•+1.3V•+1.2V•+12V (system volts)•+12V (redundant PS)•+12V (Primary PS)•Temp•Fan 1 RPM•Fan 2 RPM•Pri PS•Red PS
]
Response description (DMS 2000):
+3.3V•+5V•+1.3V•+1.2V•+12V (system volts)•
00
.
00•00
.
00•Temp•Fan RPM•00000•PS•0
]
Response description (DMS 3200):
+3.3V•+5V•+1.3V•+1.2V•+12V (system volts)•
00
.
00•00
.
00•Temp•Fan 1 RPM•Fan 2 RPM•PS•0
]
Response description (DMS 3600):
+3.3V•+5V•+1.3V•+1.2V•+12V (system volts)•+12V (redundant PS)•+12V (Primary PS)•Temp•Fan 1 RPM•Fan 2 RPM•Fan 3 RPM•Fan 4 RPM•
Pri PS•Red PS
]
NOTE: The response to the View File Directory command differs, depending on whether the command is sent via an RS-232/RS-422 or
Telnet connection or via a web browser connection.
View file directory
RS-232/RS-422 port and
Telnet
E
DF
}
filename1,date/time,length
]
List user-supplied files.
filename2,date/time,length
]
filename3,date/time,length
]
• •
• •
filenamen,date/time,length
]
# of Bytes•Left
]]
View file directory
web browser
E
DF
}
Var file = new array ();
List user-supplied files.
File [1] = ‘filename1,date1,filesize1’;
File [2] = ‘filename2,date2,filesize2’;
File [3] = ‘filename3,date3,filesize3’;
• •
• •
File [n] = ‘filenamen,daten,filesizen’;
File [n+1] = # of Bytes•Left
Erase a user-supplied web
page or file
E
filenameEF
}
Delfilename
]
NOTE:
X1*
= Voltage (positive or negative voltage and magnitude)
X1(
= Temperature
Degrees Fahrenheit
X2)
= Fan speed
In revolutions per minute (RPM)
X2!
= Power supply status
0 = not installed or failed
1 = installed and OK