Extron Electronics DMS 1600_2000_3200_3600 User Guide - Manual (Page 12)

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Installation 6
Installation
This section describes the installation of the DMX matrix switchers, including:
• Setup and Installation Checklist
• Rear Panel Cabling and Features
• Front Panel Configuration Port
Setup and Installation Checklist
Get ready
c Familiarize yourself with the DMS matrix switcher.
c
Obtain IP setting information for the matrix switcher from the local network administrator
(see Ethernet Connection on page 108).
Configure the matrix switcher
c Install the desired I/O boards ( page 101 ).
Perform physical installation
c Create ( page 83 ) and replace ( page 106 ) button labels (optional).
c Install the switcher in a rack ( page 100 ) (optional).
c
Cable input and output devices to the I/O boards ( page 9 ).
c Connect computers or control systems to any of the remote control ports (a serial
[RS-232/RS-422] port [ page 11 ], a USB port [ page 13 ], and a LAN port [ page 11 ]) on
the switcher (optional).
c
Connect power ( page 13 ).
c Test the switcher by creating a tie ( page 23 ).
Ancillary operations
c
Install the Matrix Switchers Control Program ( page 61 ).