Extron Electronics DMS 1600_2000_3200_3600 User Guide User Manual
Page 75
DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Matrix Software
69
Date, Time (local), and GMT (offset) fields
See
, on the page 67.
The
Date
field displays the current date in the local zone.
The
Time
(local)
field displays the current time in the local time zone.
The
GMT
field displays the amount of time, in hours and minutes, that the local time varies
from the GMT international time reference.
NOTE: Rather than using the following procedure, you can click
Sync
Time
to
PC
to
set the switcher to the internal time on your computer.
If desired, adjust any of these values as follows:
1.
Click in the desired field. The field changes to an editable field appropriate to the value
being changed and the graphic cursor becomes a text cursor.
•
The
Date:
field becomes a set date field, with the date in
the format (M)M/(D)D/YYYY. Leading zeroes are not shown.
•
The
Time
(local):
field becomes a set time field, with the
time in the format HH:MM:SS (00:00:00 to 23:59:59).
•
The
GMT
field becomes a set offset field, with the offset in the format
±HH:MM (–12:00 to +14:00).
2.
Edit the field as desired to set the proper value. For time, remember to use 24-hour
time. Leading zeroes are optional.
3.
Press
4.
Click
Take
to make the date change take affect.
Sync Time to PC button
Click
Sync
Time
to
PC
to force the computer you are operating to send its internal time to
the switcher in a set time command.
Use Daylight Saving checkbox
Click in the
Use
Daylight
Saving
checkbox to turn Daylight Saving Time on and off for
North America. When Daylight Saving Time is turned on, the switcher automatically updates
its internal clock between Standard Time and Daylight Saving Time in the spring and fall
on the date that the time change occurs in North America. When Daylight Saving Time is
turned off, the switcher does not adjust its time reference.
NOTE: For Daylight Saving Time in Europe and Brazil, see the