Extron Electronics DMS 1600_2000_3200_3600 User Guide User Manual
Page 84
DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Matrix Software
78
Tools menu
Assign
Device
Icons
— Displays the complete set of input and
output device icons. You can drag any of these icons to the input and
output boxes.
Edit
Device
Palette
— Allows you to add your own device icon
graphics.
Mute-Outputs
settings
— Displays the Mute Adjust screen, from
which you can mute each output.
EDID
settings
— Displays the EDID Configuration dialog box
(see figure 48), from which you can select a pre-programmed
resolution and refresh rate for an input and save the output resolution
of the monitor connected to output 1 to one of the user-defined
locations.
Figure 48.
EDID Configuration Dialog Box
NOTES:
•
EDID communicates video display information, including native resolution and
vertical interval refresh rate requirements, to the input. The input device then
outputs the optimal video format for the output (such as a display) based on the
provided EDID data, ensuring proper video image quality. This communication
takes place over the Display Data Channel (DDC).
•
In the EDID Configuration window, the EDID data can come from either an active
output or be set to a specified value.
Update
Firmware
... — Allows you to replace the firmware that is coded on the control
board in the switcher without taking the switcher out of service, opening the switcher
enclosure, and replacing the firmware chip set (see
IP
Options
— Allows you to set IP options (see
on
page 67).