Determining whether devices are on the same subnet, Determining whether devices are, On the same subnet – Extron Electronics DMS 1600_2000_3200_3600 User Guide User Manual
Page 120
DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Ethernet Connection 114
Determining Whether Devices are on the Same Subnet
To determine the subnet, the IP address of the local device is compared to the IP address
of the remote device (see figure 79). The octets of each address are compared or not
compared, depending on the value in the related subnet mask octet.
If a subnet mask octet contains the value 255, the related octets of the IP addresses of the
local device and the remote device are unmasked.
Unmasked octets are compared (indicated by
?
in figure 79).
If the subnet mask octet contains the value 0, the related octets of the IP addresses of the
local device and remote device are masked.
Masked octets are not compared (indicated by
X
in figure 79).
If the unmasked octets of the two IP addresses
match (indicated by
=
in figure 79, example 1),
the two addresses
are on the same subnet.
If the two unmasked fields
do not match (indicated by
≠
in figure 79, example 2 and
example 3), the addresses
are not on the same subnet.
192.168.254.254
255.255.0.0 (
?
.
?
.
X
.
X
)
192.168.2.25
=
.
=
.
X
.
X
—
Match
(
Same subnet
)
(
Different subnet
)
(
Different subnet
)
Local IP Address:
Subnet Mask:
Remote IP Address:
Match?:
Example 1
Example 2
192.168.254.254
255.255.0.0 (
?
.
?
.
X
.
X
)
190.190.2.25
≠
.
≠
.
X
.
X
—
No match
Example 3
192.168.254.254
255.255.0.0 (
?
.
?
.
X
.
X
)
192.190.2.25
=
.
≠
.
X
.
X
—
No match
Figure 79.
Comparing the IP Addresses of the Local and Remote Devices