Extron Electronics DMS 1600_2000_3200_3600 User Guide - Manual (Page 100)

DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • HTML Operation 94
Email Address fields
The eight Email Address fields identify the e-mail addresses of the personnel to whom
the DMS matrix switcher e-mails notification of its failure and repair status. Standard e-mail
address conventions (
xxxxx@ x xx.com ) apply.
The check boxes and drop boxes associated with each address field permit you to specify
specific criteria under which the switcher will e-mail recipients. In the associated
Missing
Input drop boxes, select the inputs to monitor for presence or absence of a signal. Check
the Fans and Power boxes to monitor the cooling and power supplies. In the associated
Email Options drop box, select whether the recipient is to be e-mailed of failures, fixes,
both, not notified, or to be removed from the e-mail list. The Suspend option is useful for
temporarily removing personnel from the e-mail list when they are unavailable, such as
when travelling or on vacation. Deleting an e-mail addressee and clicking the
Submit button
removes the recipient from e-mail notification completely.
Firmware Upgrade Page
The Firmware Upgrade page provides a way to replace the switcher firmware without taking
the switcher out of service. Access the Firmware Upgrade page (see figure 62) by clicking
the
Firmware Upgrade link on the System Settings page.
Figure 62. Firmware Upgrade Page
Update the switcher firmware as follows:
NOTE: The Firmware Upgrade page is only for replacing the firmware that controls all
switcher operation. To insert your own custom HTML pages, see File Management
Page , on page 96.
1. Perform steps 1 through 6 of Updating Firmware on page 72.
NOTE: Note the folder to which the firmware file is saved.
2. Connect the PC to the DMS matrix switcher via the LAN port on the switcher.
3. Access the DMS matrix switcher using HTML pages.
4. Click the Configuration tab.