Extron Electronics DMS 1600_2000_3200_3600 User Guide - Manual (Page 62)

Command and Response Table for SIS Commands (continued)
DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Programming Guide 56
Command ASCII Command
(Host to Unit)
Response
(Unit to Host)
Additional Description
Front panel locks (Executive mode)
Lock front panel 1X Exe1 ]
Unlock front panel 0X Exe0 ]
View lock status X X#]
Resets
Reset all global presets E ZG } Zpg ] Clear all global presets and their names.
Reset one global preset EX^ ZG } Zpg X^] Clear global preset X^ .
Reset all mutes E ZZ } Zpz ] Unmute all outputs.
Reset room map (outputs) E ZR } Zpr ] Clear all room definitions.
Reset individual room EX& ZR } Zpr X&] Delete room X& .
Reset individual room preset EX& * X( ZP } Zpp X& * X(] Clear an individual room preset ( X& * X( ) and name.
Reset whole switcher E ZXXX } Zpx ] Clear all ties and presets, rooms, and I/O names.
Reset settings and delete files E ZY } Zpy ] Excludes IP settings to preserve communications.
Recommended after a firmware update.
Absolute reset E ZQQQ } Zpq ] Similar to Reset whole switcher, plus clear the
IP address to 192.168.254.254 and subnet mask
to 255.255.000.000.
Information requests
Information request I V X1@ X X1# •A X1@ X X1# •S X1$ 1 X1$ 2 ... X1$ n ]
V X1@ X X1# shows the number of available inputs
and outputs for this configuration.
A
X1@ X X1# has no meaning for this product.
S X1$ 1 X1$ 2 ... X1$ n shows the board type
installed in each slot. n is either 4 (DMS 1600),
5 (DMS 2000), 8 (DMS 3200), or 9 (DMS 3600).
Request part number N X1%] See the part numbers listed on the Extron web
site,
www.extron.com .
NOTE: There are up to three separate sets of Extron firmware on which the switcher can report: the controller firmware, which is the
overall control firmware; the Ethernet protocol firmware, which handles the Ethernet interface; and the latest optional Extron firmware
update, which is available at
www.extron.com .
Query firmware version Q X1^]
Example: Q 1.23 ] The factory installed firmware controller version
is 1.23 (sample value only).
Query controller firmware
version (verbose) 0Q X1^ - X1& - X1&] Provide a detailed status of the Ethernet protocol
firmware, the controller firmware, and an firmware
upgrade. The firmware that is running is marked
by an asterisk (*). A caret (^) indicates that the
firmware has a bad checksum or an invalid load.
?.?? indicates that firmware is not loaded.
Response description: Ethernet protocol firmware version–controller firmware version–updated firmware version ]
0q See below
1.23-1.00(1.68-DMS1600••••-Wed, 24 Feb 2010 00:00:00 GMT)-1.00*(1.06-DMS1600••••-Mon, 27 Mar 2010 16:39:21 GMT)
Ethernet protocol
firmware
Description
DMS firmware version Updated firmware version
* indicates the version running Upload date and time
NOTE: X# = Lock status 0 = not locked 1 = locked
X^ = Global preset number 00 through 32
X& = Room number (for room presets) 01 through 10 (each can have up to 10 room presets [ X( s] assigned)
X( = Room preset number 00 through 10
X1@ = Number (quantity) of inputs 4, 8, 12, 16, 20, 24, 28, 32, 36
X1# = Number (quantity) of outputs 4, 8, 12, 16, 20, 24, 28, 32, 36
X1$ = Board installed X0 = No board installed C1 = 4 DVI inputs x 4 outputs D1 = 4 fiber inputs x 4 outputs
C2 = 4 DVI inputs x 0 outputs D2 = 4 fiber inputs x 0 outputs
C3 = 0 DVI inputs x 4 outputs D2 = 4 fiber inputs x 0 outputs
X1% = Part number 60-nnnn-01
X1^ = Firmware version number to second decimal place (x.xx)
X1& = Verbose firmware version-description-upload date/time