Uploading html files – Extron Electronics DMS 1600_2000_3200_3600 User Guide User Manual
Page 82
DMS 1600, DMS 2000, DMS 3200, and DMS 3600 • Matrix Software
76
Uploading HTML Files
You can create customized HTML pages for the switcher to display. The HTML Files List
window (see figure 47), accessible via the Tools menu, provides a way to view the contents
of the file system and upload custom HTML pages to the switcher.
NOTE: The HTML Files List window is for inserting your own HTML pages. This is not
the window to replace the firmware that controls all switcher operation (see
on page 72 to replace the firmware).
2
3
1
Figure 47.
HTML Files List Window
NOTE: The files listed in figure 47 are shown for example only and may not be present
on your switcher.
Upload HTML pages as follows:
NOTE: The following characters are invalid or not recommended in file names:
{space} + ~ , @ = ‘ [ ] { } < > ’ “ ; : | \ and ?.
1.
Connect the PC to the matrix switcher via the RS-232/RS-422 port, USB port, or
Ethernet port on the switcher.
2.
Start the Matrix Switchers Control Program and connect to the DMS matrix switcher
(see
, steps 1 through 4, starting on page 64).
3.
Click
Tools
>
HTML
File
Manager
.
4.
Click
Pick
File(s)
to
Load
to
Server
(
a
). An Open File dialog box opens.
5.
Navigate to the folder where you saved the HTML file. Select the file.
NOTES:
•
To select multiple files, hold the
•
If you want one of the HTML files that you created to be the default start-up
page, name the file “index.html.” The DMS matrix switcher automatically looks
for that file name when you first connect to it using an Internet browser.
6.
Click
Open
. The upload of files to the DMS matrix switcher may take a few minutes.
7.
Click
Update
to confirm the upload (
b
).
8.
Click
Close
to exit the HTML Files List window (
c
).