B&B Electronics ADAM-6066 - Manual - Manual (Page 90)

ADAM-6000 Series User Manual 80
1. Channel Setting
You can see the current value of analog input on this tab. Choose the
check box of the analog input channels you want to monitor and click the
Apply button. If the analog input value is out of the input range, you will
see “Over(L)” in the analog input value text box. At the right side, you
can see current digital input value by DI 0 and DI 1 LED display.
You also can see the graphical historical trend of analog input channel by
clicking the Trend Log button. All the operations for trend logging is the
same as ADAM-6015, ADAM-6017 and ADAM-6018 module.
2. Modbus
You can see current analog input value in decimal and hexadecimal for all
related Modbus address.
On Output tab, you can write value to analog and digital output channel,
as well as configure all related setting. There are also two tabs on the Out-
put tab: Channel setting and Modbus. Refer to Figure 5.11 below.
Figure 5.11: ADAM-6024 Output Tab