B&B Electronics ADAM-6066 - Manual - Manual (Page 140)

ADAM-6000 Series User Manual 130
6.4.3 Analog Input Command Set
(ADAM-6015, 6017, 6018)
Command
Syntax Command
Name Description
#aan Read Analog
Input from
Channel N
Return the input value from the specified analog input
channel
#aa Read Analog
Input from all
channels
Return the input values from all analog input channels
$aa0 Span
Calibration
Calibrate the analog input module to correct the gain
error
$aa1 Offset
Calibration
Calibrate the analog input module to correct the offset
error
$aa6 Read Channel
Enable/Disable
Status
Asks a specified module to return the Enable/Disable
status of all analog input channels
$aa5mm Set Channel
Enable/Disable
Status
Set Enable/Disable status for analog input channels
#aaMH Read all
Max. Data
Read the maximum data from all analog input
channels
#aaMHn Read single
Max. Data
Read the maximum date from a specified analog input
channel
#aaML Read all
Min. Data
Read the minimum data from all analog input
channels
#aaMLn Read single
Min. Data
Read the minimum data from a specified analog input
channel
#aaDnd Set Digital
Output
Sets the status for the specified digital output channels
$aaBnn Read Analog
Input Range
Code
Return the input range code from the specific analog
input channel