B&B Electronics ADAM-6066 - Manual - Manual (Page 136)

ADAM-6000 Series User Manual 126
Response !aa60bb(cr) if the command is valid.
?aa(cr) if an invalid operation was entered.
There is no response if the module detects a syntax error,
communication error or if the address does not exist.
! delimiter indicating a valid command was received.
? delimiter indicating the command was in-valid.
aa (range 00-FF) represents the 2-character hexadecimal
slave address of an ADAM-6000 module.
bb (range 00-FF) represents the 2-character model number
of an ADAM-6000 module.
(cr) is the terminating character, carriage return (0Dh).
Example command: $01M(cr)
response: !016050(cr)
The command requests the system at address 01h to send its
module name. The system at address 01h responds with
module name 6050 indicating that there is an ADAM-6050
at address 01h.
$aaF
Name
Read Firmware Version
Description Returns the firmware version from a specified module.
Syntax
$aaF(cr)
$ is a delimiter character.
aa (range 00-FF) represents the 2-character hexadecimal
slave address of the ADAM-6000 module you want to
interrogate. (Always 01)
F is the Firmware Version command.
(cr) is the terminating character, carriage return (0Dh).