B&B Electronics ADAM-6066 - Manual - Manual (Page 78)

ADAM-6000 Series User Manual 68
You can change the password later. After you type the correct password,
the ADAM-6000 module is now under IP of your host PC.
When you select the IP address of the ADAM-6000 modules you want
use in Module Tree Display area, there will be 8 tabs appearing in the
Status Display area for you to set up general configuration of that mod-
ule. Refer to figure below. Once you have changed any configuration,
remember to click related Apply or Apply Change button.
Below is detailed information for the 8 tabs in the Status Display area:
Information
You can see the Firmware Version on the selected ADAM-6000 module
in this tab. You also can change the Device Name and Device Descrip-
tion. When you have several ADAM-6000 modules in the same network,
it is helpful to identify your interested ADAM-6000 modules using spe-
cific device name and device description.