Garmin G1000 King Air C90GT - Manual (Page 405)

190-00663-01 Rev. A Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT 391
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
OPERATION
The KTA 870 must be in Operating Mode for traffic to be displayed. The unit starts in Operating Mode upon
power-up.
Selecting the STANDBY Softkey forces the unit into Standby Mode. Selecting the NORMAL Softkey allows
the KTA 870 to switch from Standby Mode to Operating Mode as necessary.
Switching from operating mode to standby mode:
On the Traffic Page, select the STANDBY Softkey
Or :
1) Press the MENU Key and turn the small FMS knob to select Standby Mode.
2) Press the ENT Key.
Switching from standby mode to operating mode:
On the Traffic Page, select the NORMAL Softkey
Or :
1) Press the MENU Key and turn the small FMS knob to select Normal Mode.
2) Press the ENT Key. The KTA 870 switches from Standby Mode to Operating Mode as necessary.
System Self Test
1) Set the range to 2/6 nm.
2) Select the TEST Softkey.
3) Self test takes approximately eight seconds to complete. When completed successfully, traffic symbols are
displayed and a voice alert “TAS System Test Passed” is heard. In the event that the system test fails, the system
reverts to Standby Mode and a voice alert “TAS System Test Failed” is heard.
DISPLAYING TRAFFIC DATA
Traffic information can be displayed on the following maps when the KTA 870 unit is operating:
• PFD Inset Map
• Navigation Map Page
• Traffic Map Page
• Trip Planning Page
• Nearest Pages
• Active Flight Plan Page