System overview – Garmin G1000 King Air C90GT User Manual
Page 36

190-00663-01 Rev. A
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
22
SYSTEM OVERVIEW
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
DME
Displays the DME Tuning Window, allowing tuning and selection of the DME
(optional)
XPDR
Displays transponder mode selection softkeys
XPDR1
Selects the #1 transponder as active
XPDR2
Selects the #2 transponder as active
STBY
Selects standby mode (transponder does not reply to any interrogations)
ON
Selects Mode A (transponder replies to interrogations)
ALT
Selects Mode C – altitude reporting mode (transponder replies to identification and
altitude interrogations)
GND
Manually selects Ground Mode, the transponder does not allow Mode A and
Mode C replies, but it does permit acquisition squitter and replies to discretely
addressed Mode S interrogations
VFR
Automatically enters the VFR code (1200 in the U.S.A. only)
CODE
Displays transponder code selection softkeys 0-7
0 — 7
Use numbers to enter code
BKSP
Removes numbers entered, one at a time
ADS-B TX
Enables/disables automatic transmission of ADS-B position and speed.(optional)
IDENT
Activates the Special Position Identification (SPI) pulse for 18 seconds, identifying
the transponder return on the ATC screen
TMR/REF
Displays Timer/References Window
NRST
Displays Nearest Airports Window
ALERTS
Displays Alerts Window
Figure 1-16 Top Level PFD Softkeys
ALERTS
(optional)