Arrivals, Flight management, Loading an arrival into the active flight plan – Garmin G1000 King Air C90GT User Manual
Page 254
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
190-00663-01 Rev. A
240
FLIGHT MANAGEMENT
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
ARRIVALS
A Standard Terminal Arrival (STAR) can be loaded at any airport that has one available. Only one arrival
can be loaded at a time in a flight plan. If an arrival is loaded when another arrival is already in the active
flight plan, the new arrival replaces the previous arrival. The route is defined by selection of an arrival, the
transition waypoints, and a runway.
LOADING AN ARRIVAL INTO THE ACTIVE FLIGHT PLAN
Loading an arrival into the active flight plan using the PROC Key:
1)
Press the PROC Key. The Procedures Window is displayed.
2)
Highlight ‘SELECT ARRIVAL’.
3)
Press the ENT Key. The Arrival Loading Page is displayed.
4)
Select an arrival from the list and press the ENT Key.
6)
Select a transition (if required) and press the ENT Key.
7)
Select a runway (if required) and press the ENT Key. ‘LOAD?’ is highlighted.
8)
Press the ENT Key to load the arrival procedure.
Figure 5-92 Arrival Selection
Destination Airport
Arrival Preview
Available Procedure Actions
Arrival Choices
Loaded Procedures