Hazard avoidance, Cell and strike mode on the navigation map – Garmin G1000 King Air C90GT User Manual
Page 356
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
190-00663-01 Rev. A
342
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL FEA
TURES
APPENDICES
INDEX
CELL AND STRIKE MODE ON THE NAVIGATION MAP
On the Navigation Map, cell mode identifies cells of lightning activity (Figure 6-66). Stormscope identifies
clusters of electrical activity that indicate cells. Strike mode indicates the approximate location of lightning
strikes.
Selecting the ‘cell’ or ‘strike’ mode on the Navigation Map:
1)
Press the MENU Key.
2)
With ‘Map Setup’ selected, press the ENT Key (Figure 6-64).
3)
Select the ‘Weather’ group (Figure 6-65).
4)
Press the ENT Key. The cursor flashes on ‘STRMSCP LTNG’.
5)
Turn the large FMS Knob to select ‘STRMSCP MODE’.
6)
Turn the small FMS Knob to change between ‘CELL’ and ‘STRIKE’ options. When an item is selected, press the
ENT Key.
7)
Press the
FMS
knob to return to the Navigation Map Page.
Figure 6-66 Navigation Map Page with Stormscope
Lightning Data
Map
Orientation
Stormscope
Mode
Strike Rate
per Minute
Stormscope
Icon
80 nm Map
Range