Hazard avoidance – Garmin G1000 King Air C90GT User Manual
Page 407
190-00663-01 Rev. A
Garmin G1000 Pilot’s Guide for the Hawker Beechcraft C90A/GT
393
HAZARD AVOIDANCE
SY
STEM
O
VER
VIEW
FLIGHT
INSTRUMENTS
EIS
AUDIO P
ANEL
& CNS
FLIGHT
MANA
GEMENT
HAZARD
AV
OID
ANCE
AFCS
ADDITIONAL
FEA
TURES
APPENDICES
INDEX
When traffic is selected on maps other than the Traffic Map Page, a traffic icon is shown to indicate TAS is
enabled for display.
Displaying traffic on the Navigation Map
1)
Ensure that the TAS system is operating. With the Navigation Map displayed, select the MAP Softkey.
2)
Select the TRAFFIC Softkey. Traffic is now displayed on the map as shown in the figure.
Proximity
Traffic
Figure 6-112 TAS Traffic on Navigation Map
Traffic
Advisory
TA Off Scale
Banner
Non-Bearing
Traffic Advisories
Non-Threat
Traffic
Displaying traffic information (PFD Inset Map):
1)
Select the INSET Softkey.
2)
Select the TRAFFIC Softkey to display traffic data on the inset map (TRFC-1).
3)
Select the softkey again to display the traffic-only inset (TRFC-2).
4)
Select the softkey again to remove traffic data.
The Navigation Map Page Setup Menu also controls the display of traffic. The setup menu controls the map
range settings. Traffic data symbols and labels can be decluttered from the display. If a map range larger than
the map range setting is selected, the data is removed from the map. Maps besides the Traffic Map Page use
settings based on those selected for the Navigation Map Page.