Filtering, 1 overview, 2 configure a filtering rule – ZyXEL Communications ZyXEL Dimension ES-4024 User Manual
Page 94: Chapter 10 filtering, 1 overview 10.2 configure a filtering rule, Figure 42 filtering, Table 19 filtering
ES-4024A User’s Guide
Chapter 10 Filtering
93
C
H A P T E R
10
Filtering
This chapter discusses static IP and MAC address port filtering.
10.1 Overview
Port filtering means discarding (or dropping) traffic flow based on the source and/or
destination IP and/or MAC addresses and VLAN group.
You must first configure rules to classify traffic flows in the Classifier screen.
10.2 Configure a Filtering Rule
Activate filtering on a specified traffic flow in the Filtering screen. Click Advanced
Application and Filtering in the navigation panel to display the screen as shown next.
Figure 42 Filtering
The following table describes the related labels in this screen.
Table 19 Filtering
LABEL
DESCRIPTION
Active
Make sure to select this check box to activate your rule. You may temporarily deactivate a
rule without deleting it by deselecting this check box.
Name
This read-only field displays the name of the classifier you select in the Classifier field.