ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 210)

ES-4024A User’s Guide
Chapter 37 Introducing the Commands 209
37.9.1 User Mode
The following table describes the commands available for User mode.
37.9.2 Enable Mode
The following table describes the commands available for Enable mode.
Table 82 Command Summary: User Mode
COMMAND DESCRIPTION
enable Accesses Enable (or privileged) mode. See Section 37.9.2
on page 209 .
exit Logs out from the CLI.
help Displays help information.
history Displays a list of previously command(s) that you have
executed. The switch stores up to 256 commands in
history.
logout Exits from the CLI.
ping Sends a Ping request to an Ethernet device.
show hardware-monitor Displays current hardware monitor information with the
specified temperature unit (Celsius C or Fahrenheit F).
system-information Displays general system information.
traceroute
[ttl <1-255>]
[wait <1-60>]
[queries <1-10>]
Determines the path a packet takes to a device.
Table 83 Command Summary: Enable Mode
COMMAND DESCRIPTION
baudrate <1|2|3|4|5> Changes the console port speed. Choices
are 1 (9600), 2 (19200), 3(38400), 4
(57600) and 5 (115200).
boot Restarts the switch.
configure Accesses Configuration mode. See
Section 37.9.3 on page 212 .
disable Exits Enable (or privileged) mode.
enable Accesses Enable (or privileged) mode.
erase running-config Resets to the factory default settings.
exit Exits Enable (or privileged) mode.
help Displays help information.
history Displays a list of command(s) that you
have previously executed.
logout Exits Enable (or privileged) mode.