ZyXEL Communications ZyXEL Dimension ES-4024 - Manual (Page 222)

ES-4024A User’s Guide
Chapter 37 Introducing the Commands 221
vrrp network
address>/
vr-id <1-7> uplink-
gateway
Adds aa new VRRP network nd
enters the VRRP configuration
mode.
inactive Disables the VRRP settings.
interval <1..255> Sets the time interval (in
seconds) between Hello
message transmissions.
name
string>
Sets a descriptive name of the
VRRP setting for identification
purposes.
no inactive Activates this VRRP.
no preempt Disables VRRP preemption
mode.
no primary-
virtual-ip
Resets the network to use the
default primary virtual gateway
(interface IP address).
no secondary-
virtual-ip
Sets the network to use the
default secondary virtual
gateway (0.0.0.0).
preempt Enables preemption mode.
primary-virtual-
ip <ip>
Sets the primary VRRP virtual
gateway IP address.
priority <1 ..
254>
Sets the priority of the switch in
the VRRP network.
secondary-
virtual-ip <ip>
Sets the secondary VRRP
virtual gateway IP address.
service-control ftp Allows FTP access on the
specified service port.
http Allows HTTP access on the
specified service port.
igmp Allows IGMP managament for
Ping, traceroute, etc..
snmp Allows SNMP management.
telnet
number>
Allows Telnet access on the
specified service port.
snmp-server [contact
contact>] [location
]
Sets the geographic location
and the name of the person in
charge of this switch.
get-community Sets the get community.
set-community Sets the set community.
trap-community Sets the trap community.
Table 84 Command Summary: Configuration Mode (continued)
COMMAND DESCRIPTION